AP Automation Tools Pricing Compared per Invoice

Nov 19, 2026

Try it now: upload an invoice and get the data in Excel or CSV

Upload your invoices

PDF, JPG, PNG, BMP, HEIC and TIFF

Short answer: AP automation tools price on four different units (per user, per payment, per document or per page), so the only fair comparison is cost per invoice at your own volume. At 300 bills a month paid by ACH with three users, BILL Team works out to about $1.24 an invoice, Ramp's free plan about $0.59, Melio Unlimited about $0.27 and a flat $49 extraction plan about $0.16. The cheaper tools do less, and the table below says exactly what each one covers.

Every figure here was read from the vendors' own pricing pages in November 2026: bill.com/pricing, melio.com/pricing, ramp.com/pricing, tipalti.com/pricing and veryfi.com/pricing. Where a vendor does not publish a number, we say so and do not invent one. The worked volumes are assumptions, written next to each table, so you can swap in your own.

Why AP automation tools pricing is hard to compare

Most comparison articles list a "starting at" price for each tool and stop there. That hides the part that decides your bill. BILL charges every user a seat and then charges each ACH payment. Melio charges a plan fee and gives a monthly allowance of free payments. Ramp charges nothing for software on its free plan but charges for payments that do not leave from a Ramp Checking Account. Veryfi charges per document with a monthly minimum. We charge per page on a flat plan.

Put those side by side as headline prices and Ramp at $0 looks unbeatable while Veryfi at $0.16 looks cheap. Run them at a real volume and the order changes. So the method below is simple: pick a team size, pick three volumes, add every published fee, divide by the number of invoices.

Published prices of the AP automation tools in this comparison

ToolPricing unitPublished priceWhat it covers
BILL (Bill.com)Per user plus per paymentEssentials $49, Team $65, Corporate $89 per user a month. ACH $0.59, check $1.99Capture, approvals, payments, QuickBooks and Xero sync
RampPer payment on Free, per user on PlusFree $0. Plus $15 per user a month plus a platform fee. ACH $0.59, check $1.99, waived from a Ramp Checking AccountCapture (OCR), approvals, payments. Line item coding listed on Plus
MelioPer plan plus payments over allowanceGo $0 (5 ACH), Core $25 (20 ACH), Boost $55 (50 ACH), Unlimited $80 with unlimited users and ACH. Extra ACH $0.50, check $1.50Bill pay and approvals, aimed at small business
TipaltiPlatform fee plus fees it does not itemizeAP automation from $99 a monthSupplier onboarding, capture, approvals, global payments
VeryfiPer document with a monthly minimumFree up to 100 documents. Starter $0.16 per invoice, $500 monthly minimumCapture API only
InvoiceExtractorPer page on a flat planStarter $49 a month for 2,500 pages, Plus $149 for 10,000Capture with every line item, Excel, CSV and JSON output

Two of these tools, Veryfi and ours, only do capture. The other four also approve and pay. That is not a footnote, it is the main thing you are choosing between, and we come back to it below.

AP automation cost per invoice at 100, 300 and 1,000 bills

Assumptions for this worked example: three people need access, every bill is paid by standard ACH from an ordinary business bank account, invoices are one page, and the cheapest plan that fits is used. BILL is shown on Team because that is the first tier BILL lists with AI line coding. Tipalti is shown at its $99 floor because the rest of its fees are not published.

Tool and plan100 bills a month300 bills a month1,000 bills a month
BILL Team, 3 users$195 + $59 = $254 ($2.54 each)$195 + $177 = $372 ($1.24 each)$195 + $590 = $785 ($0.79 each)
Ramp Free, ACH from outside Ramp$59 ($0.59 each)$177 ($0.59 each)$590 ($0.59 each)
Melio Unlimited$80 ($0.80 each)$80 ($0.27 each)$80 ($0.08 each)
Tipalti AP, floor onlyFrom $99 (from $0.99 each)From $99 (from $0.33 each)From $99 (from $0.10 each)
Veryfi Starter$0 on Free (100 cap)$500 floor ($1.67 each)$500 floor ($0.50 each)
InvoiceExtractor Starter$49 ($0.49 each)$49 ($0.16 each)$49 ($0.05 each)

Three patterns stand out. Seat pricing punishes small volumes: BILL costs over $2.50 an invoice at 100 bills because the seats are the same whether you pay 100 bills or 1,000. Per-payment pricing is flat: Ramp stays at $0.59 an invoice at every volume unless you move your money into Ramp Checking, in which case it drops to zero. And Melio Unlimited gets very cheap at volume, which is why it is worth checking whether your approval needs fit inside it before you look at anything pricier.

If you pay by mailed check, add $1.99 a check on BILL and Ramp or $1.50 on Melio. A business paying half its 300 bills by check adds roughly $300 on BILL or Ramp and $225 on Melio, which changes the ranking far more than any plan fee.

How much does AP automation cost for a small business?

For a small business paying 100 to 300 bills a month, published AP automation tools run from $0 to about $400 a month, or roughly $0.15 to $2.50 an invoice. Payment-led tools land at the low end if you accept their bank account. Seat-priced platforms cost more as approvers are added. Enterprise suites such as Coupa and Basware publish no price.

That range only covers the software. The larger cost for most small teams is still the hours spent keying bills, especially line items. If your invoices carry ten or twenty lines that have to be split across accounts or checked against a purchase order, a tool that captures only vendor, date and total leaves most of the work in place.

Is AP automation worth it for a small business?

It is worth it when the hours saved are worth more than the monthly bill. Take 300 invoices a month at about four minutes of typing each: that is 20 hours. At a loaded $30 an hour, the typing costs around $600 a month, so any tool in the table above pays for itself if it removes most of those hours. The question is which step you actually need removed.

If your approvals already run by email or inside QuickBooks and you pay from your bank without trouble, then the step costing you money is capture. Paying $372 a month for a full platform to fix capture is the expensive route. Focused AP processing software for invoice capture handles that step alone and leaves the rest of your process untouched.

If you have no approval trail at all, or you write a lot of checks, a payment platform earns its fee. Melio and Ramp are the low-cost entries there, and BILL makes sense once you need its accountant tools or richer approval roles.

Where each tool wins

  • BILL wins for accounting firms and teams that need approvals, payments and receivables in one product with published prices. Our breakdown of Melio vs Bill.com cost shows where the seats start to hurt.
  • Ramp wins if you are willing to move payments to its account, because the software and most payment fees go to zero. The fee details are in our Ramp bill pay pricing breakdown.
  • Melio wins on price for small businesses that mainly need to pay bills by ACH and are fine with a lighter approval setup.
  • Tipalti wins for companies paying many suppliers across countries and currencies, where tax forms and global payouts matter more than the platform fee. Read what the $99 leaves out in Tipalti pricing.
  • Veryfi wins for developers building capture into their own product at several thousand documents a month, where the $500 minimum is used up. Below that, see Veryfi pricing for the effective rate.
  • InvoiceExtractor wins when the job is getting every line of every invoice into a spreadsheet or ledger import, at a flat price that does not grow with users or payments.

What is the cheapest AP automation software?

On published prices, Melio Go and Ramp Free both start at $0 a month, but they charge per payment above a small allowance or outside their own bank account. For capture alone, a flat $49 plan for 2,500 pages is the lowest cost per invoice above about 100 bills a month in this comparison.

Cheapest is not the same as best fit. A tool that is cheap per invoice but leaves you typing line items is expensive in hours. If you are still deciding which kind of tool you need, our guide to AP automation solutions compared by type and price sorts capture tools, bill pay platforms, AP suites and ERP modules first. Before you pick, run your three hardest invoices through each tool you are considering: a scanned bill, a long multi-page invoice and one from a supplier with an unusual layout.

Costs that do not appear on pricing pages

  • Implementation. Quote-based suites often charge setup or onboarding fees. Ask for them in writing.
  • ERP tier gates. BILL lists NetSuite and Sage Intacct sync on custom-priced Enterprise only. Check which tier carries your system.
  • Line item fees. Some capture tools meter line items separately or reserve them for higher plans.
  • Freight and logistics bills. If freight invoices are a big share of your payables, matching them to real shipments is its own task. A shipment number check such as ShipmentVisibility can sit next to capture before you approve the bill.
  • Contract terms. Annual commitments, renewal increases and how you export data if you leave.

How to run this math for your own AP

  1. Count last month's bills and how many were paid by ACH, check and card.
  2. Count the people who must enter or approve bills in the tool.
  3. Add the plan fee, seats and payment fees at those numbers for each shortlisted tool.
  4. Divide by bills to get cost per invoice, then add the hours of typing each tool still leaves you.
  5. Test capture on your own invoices before signing anything.

The fastest way to do step five is the uploader at the top of this page. Drop in a real supplier invoice and look at the line items in the output. If capture is your bottleneck, our AP processing software page covers how it fits in front of QuickBooks, Xero or your ERP, and the broader AP automation software comparison covers the full suites for teams that need approvals and payments too.